Digiweigh DWP-PC User Manual download pdf (Page 18)

b. The instrument: -

 displays “ACC” on Weight Panel. ACC denotes data has been

accumulated to memory,

 displays “n” on Unit Price Panel. n donates the number of

transactions which have been accumulated to memory.

 Displays total accumulated value on Amount Panel

 output transaction printout(s)

through the RS232 comport. The

instrument returns to normal operation status after 2 seconds,

c. Repeat a for subsequent transactions

6.7.2 Memory Clearance

a. Remove all loads from platter,

b. Follow 6.6 Change paid back

c. Press [Print] to send out total accumulated Amount from memory

including payment and change paid back

d. Now the Memory is clearance

NOTE: ONLY AFTER PAYMENT AND CHANGE PAID BACK ,CAN

CLEARANCE THE MOMERY

7. RS232 DATA OUTPUT

Data output parameters are fixed as below: -

 Data Bit = 8

 Parity = None

 Stop Bit = 1

There are 2 data output modes (PC and Prt) are available

. PC is for

communication with computer and other peripherals which accepts and

processes continuous data communication. Prt (printer) is for transmission

to printer or other peripherals which accept only single or manual data

Unstable weight will not be accumulated to memory. If print is pressed

when weight is unstable, the instrument will reject this command and

response with 2 beeps.

The number of copies sent = the number of copy set in internal function

F8. Refer to 5. INITIAL SETUP for more information.

Weight reading must return to zero to enable another weight

accumulation.

Refer to 5. INITIAL SETUP for setting information

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25

No comments

Digiweigh DWP-PC User Manual Page 18